Xtrend ET-5000

I make diferent buqets for diferent IPTV sourses, the way i do it is to create a buqet name with the editor, then take the file and import it via the channel editor into my box, this has allways worked for me.

Hi Sadly my 7 months old Miraclebox Premium Ultra just died on me. some time back i buy couple of this boxes. One of them is now dead :-( I took out the powersupply from the working box, and tested on the dead box, but still the box is dead. I do not know what can be wrong, but both powersupplyes are working on the box that is OK. So im wondering what can be the ptoblem ? I use the lates bootloader adn the last egami image. Im lost and do not know what to do.

@EgamiMaster is seems that Mut@nt have got few moldes in their portofolio, maybe some one from Egami team should contact them and hear if they can provider the need thing to support them with Egami image. http://www.mutant-digital.net/contact2.html now i buy a second hand Sezam Marvel again, let,s see how long this will last for me. But now im thinking to invest in Vu+ Solo 4K UHD ore Xtrend 10 000 HD or the Mutanf 2400 HD as my next box. The time for me to move on from this problematic boxes is soon to an end, as i have tested so many of this , Venton, Miraclebox, Sezam have not ben a good experience for me.

I know Pr2 :-) have tested that box to and it is realy good one :-) I have tested the Ax Quad 2400 HD wich is the same as the Mut@nt but sisnce i have been using the Xtrend with Egami in old days, then over to venton, then to sezam and now to miraclebox , i like Egani image that is why i never buy another box if Egami would have supported the Mut@nt then i would have buy Mutant in a spiltsecond :-)

There is no log i can get out the box is plain dead, the RS232 port is not open at all. The power supply is fine is i tested with another Miraclebox Ultra that a friend of mine has and the power supply from my box works just fine in his box this box just died without me doing anything, simply died :-( I think i will better buy an Vu+ as with this boxes like Sezam and Miracleboxes im having no luck I allso have Jtag but im not sure how to connect it. I jatg files i have got it from the time i had problem with my Sezam boxes that i never managed to fix. No i will not give anyone the Jtag files, this are not to be given to anyone so please do not send PM at all.

woow no one can help with this problem im sure this is an bootloader / box problem / Image problem ho can a box just die without anything being donne to it ? here is some software problem realy. and no one can answer this, not even miraclebox it self can answer.

Hi as title says im trying to get a Miraclebox Ultra with one dvb-s2 and 2 dvb-t2 or c tuner trhre Satellite tuner is fined OK, but neither T2 or C tuner is being regognized by the box i have the lkaters bootloader and image from egami download page What can i do ???

On MB Premium HD i have this Original image Official 1.6 21.08.2013 Kernel version: 3.6.0 Gui:3.0 and in this image the DVB-T2 tuners are regognized in Miraclebox Premium HD Same tuners do not work in MB ULTRA, so now i think that this must be an image based problem or driver problem on all 5 MB ULTRA the tuner slott is fine, as when i add DVB-S2 on all 3 ports then all them work perfectly. I hope Miraclebox Sweden answer this asap otherwise im gonna send them back to them :-(

Yes i have try the OpenMB, OpenVix images to i have 5 boxes here, and all this 5 boxes are the same problem, this cannot be a motherboard problem as then if it weas then no tuners will be regognized , but i maybe wrong here :-) now i have to contact the Miraclebox in Sweden, and belive me i am not a begginer in this things i need original image from mid 2014 as i rember that with this was working before. the problem is that there is no way to find Original image, as Code-ini.com is offline all the time :-(

Nobody can explain this problem here ? where is the team ? i will try and cann miraclebox Monday and see what there explanation is in main time i hope some of you here can give some light on what i should see about The tuners are fine as they work in Miraclebox Premium HD but i need them to work in Premium Ultra model, so plz help out if you can

Im sorry Fogo, but im not understanding you, can you please explain

you mean that image for MB Premium Combo works in MB ULTRA ??? im lost realy

the problem is there is no ORIGINAL IMAGE there as you see there is no image for ULTRA box :-( im trying all day to find the original image for MB ULTRA but i have not found one :-( code-ini.com that should have the Original image is not possible to dowload image

Fogo :-) the tuners are not a problem, as they work very good in Premium HD , but they do not work in Premium ULTRA Tuners are fine as i tested them with Miraclebox Premiu HD Twin tuner. this is log from MB PREMIUM TWIN mbtwin login: root root@mbtwin:~# cat /proc/bus/nim_sockets NIM Socket 0: Type: DVB-T2 Name: DVB-T/T2 NIM Mode 0: DVB-T2 Mode 2: DVB-C Frontend_Device: 0 I2C_Device: 0 NIM Socket 1: Type: DVB-T2 Name: DVB-T/T2 NIM Mode 0: DVB-T2 Mode 2: DVB-C Frontend_Device: 1 I2C_Device: 1 root@mbtwin:~# So as shown trhe tuners are fine in this box, then must be some problem with Driver in the Ultra ????why are this tuners not regognized in ULTRA this is botherign me

This is totaly very very strange now i just try T2 tunes in Miraclebox Premium HD and there they work perfectly now im realy confuzed and need help urgently from the team :-)

Hi Fogo Thank you for your replay. root@mbultra:~# cat /proc/bus/nim_sockets NIM Socket 0: Type: DVB-S2 Name: DVB-S2 NIM Frontend_Device: 0 I2C_Device: 1 root@mbultra:~# Yes i have donne that, and have now realy try out allmost all images i can find for this box Right now im on OpenATV to see fi this will louse my problem, but even this have not :-( Im realy desperate on some help guys, and i think is very strange that none of tuners DVB-T2 or DVB-C standalone not working DVB-S2 works on all 3 tuner ports, i have tested with 3 dvb-s2 installed , all show up, I have then try with 1 DVB-S2 one DVB-T2 , only S2 shows in menu then i try with 1 S2 and 2 T2 tuners , again only the S2 tuner sshow up i have try all possible combination realy and only the S2 show in menu. i have like 10 pcs T2 tuners and about 15 C tuners and i have try all of them and noen is showing in menu or via telnet Something must be very wrong here The S2 tuner shows allways as port A even that i add this to port C or B, still in meny shows as A

Same thing happened to me, then i try to update bootloader and now im stucked with 4 boxes that are dead. what box do you have ?? i think to update the news image you need to update the bootloader first. anyway wait for a more exact answer from some one from Egami Team. what happends after this , does your box just stcuked on booting or does it boot up ?

I have 3 Sezam Marvel receivers that just died today I try to update the boxes with latest bootloader found on the Egami download page. Before update i had bootloader v3.45 in one box and v3.44 on 2 boxes all boxes works very good what i did is as following Dowloaded the last bootloader v3.46 3 separate usb pens, transfer the bootloader to the usb Updated all 3 boxes to this bootloadwer then download the Egami 6.6 last image 3 separate usb pens, transfer the images to the usb Updated all boxes to last image v 6.6 Start up the boxes In start up i see the Egamni start up picture then box counts down to 100 and start the settings process My problem is that after the booting picture my boxes do not communicate with HDMI it looks like there is a problem with the HDMI port on last bootloader or image. i try to connect the box with analog yellow , red and white cables but even there i get no pictrue on my TV The only time i see Picture on TV is when box boots up, i see the Egami pictuire then after that nothing. On the box display i see the setup but nothing on my TV. Please help me out here what can be the problem.

thank you i did test this now and this is the result i got CFE> ifconfig eth0 -addr=192.168.1.155 -mask=255.255.255.0 -gw=192.168.1.1 -dns=192.168.1.1 Invalid switch : - *** command status = -8 seems the there is still some thing missing I have realy hopes to get the bcm7425.msi tomorow then we will see :-) the problem for me is that this costs and this is why im trying to fix this with out having to pay so much money for the file :-( Lets hope i will be sendt the files tomorow :-)

Hi Pr2 and thank you for the replay the command above i have tested even before you replied all i get is this CFE> ifconfig eth0 -auto Invalid switch : - *** command status = -8 since this boxes have never ben connected to ethernet they do not have any IP the dam thing is that i have got all the nesesary files to make this fix via Jtag but i miss the main thing BCM97425.msi this is the key file to fix this boxes. Some one must have this files, but i understand they are not to be given to the Public i just cant understand how did i fucked up so many boxes ? From the "Enigma-Spark i got message this boxes are FAKE/CLONES but i cant understand how can this be clones, as then we would have heard of Clone boxes are there Clones of Sezam Boxes , Golden Interstar LX3, this are from same maker / Factory, are they not? Im not a begginer in this hobby and have programed boxes since DBOX days then moved to Dbox2, then Dreambox , Vu+, Xtrend, Venton and many others actually, part of my day to day work is testing different receiver platforms, Mips, STI, Ali, etc 2 days a go i fixed an IQON 200 via Jtag, but that was not a problem to get help from the Factory :-) thanks to them anyway all is not maybe lost, maybe some good soul will help out with this BCM97425.msi and i will fix this boxes :-) why is this so hard to get this BCM files that are need it for different receivers that are based on Broadcom chipset If not then i know and will advise all my contacts to keep a way from this kind of Manufactures / Makers

@EgamiMaster, thank you for your support and try to help me out. Much appreciated HMMM that is realy bad bad news :-( the bad news is that i need the BCM Tool for 7424 this is not easy and not every one has this. I have searched the Internet and have asked ppl that i know but none can help with this. Sad as this is not good for bussinnes and im sure here stops the Sales from this Factory. i have got the CFE.BIN i have got the JTAG , i have got the Broadcom Studio 3, all im now in need of is the BCM Tool for chipset 7424 and this is not gonna be found or send by some Angel , only Sezam or the Factory can provide this. Since i do not know who the factory is and since i did not buy the boxes from Sezam in Russia im now left with 4 dead boxes :-(

thank you for replay :-) this is what i get on hyperterminal connected with RS232 USB has already been initialized. cfe_lcd_initlcd_initCFE initialized.Invalid switch: - [flash-TOOL] Searching update files...Invalid switch: -Starting splash screen.No valid image found in flash0.splash - disabling splash CFE> ifconfig -auto eth0Invalid switch: -*** command status = -8 CFE> ifconfig -auto eth0Invalid switch: -*** command status = -8 CFE> ping google.comCould not resolve IP address of host g: Unknown error*** command status = -23CFE> printenvVariable Name Value-------------------- -------------------------------------------------- BOOT_CONSOLE uart0 LINUX_PART_STARTAD 0 LINUX_PART_SIZE 700000 LINUX_FFS_STARTAD 700000 LINUX_FFS_SIZE 7f900000 SPLASH ENABLE ETH0_PHY RGMII_NO_ID ETH0_MDIO_MODE 1 ETH0_SPEED 1000 ETH0_PHYADDR probe RTS_VER 20120919205446_7425_dual_encode ETH0_HWADDR 00:1E:A0:00:49:62 DRAM0_SIZE 1024 DRAM1_SIZE 1024 FLASH_TYPE NAND FLASH_SIZE 4 CFE_VERSION 3.41 CORE_VERSION 3.45 CHIP_PRODUCT_ID 74240012 CFE_BOARDNAME BCM97425SVMB CFE_MEMORYSIZE 128*** command status = 0CFE>

this is what i get now CFE> flash -noheader 192.168.1.109:cfe.bin flash0.cfe Invalid command: "flash -noheader 192.168.1.109:cfe.bin flash0.cfe"Available commands: cfgrts, ts, show usb, loadmcb, setddr, info, set console, loop, reboot, dir, macprog, macprog2, flash, memtest, t, f, e, d, u, show heap, show memory, batch, go, load, save, boot, ephycfg, ping, ifconfig, sleep, waitusb, show devices, testenv, incenv, unsetenv, printenv, setenv, help *** command status = -1 as you can see there is a invalid comand

would you please post the TFTP program you are suing I have try now 2-3 tftp programs but none is working im not being able to contact the TFTP server via the box Happy New Year

any help guys how to run TFTP from Windows or Mac im going mad with this boxes One of them si not totaly dead as i cannot get contact with rs232 at all all that shows now is just red diod light on front display