EgamiMaster

Hello, It will arrive Stay tuned.

You can not setup speed of the FAN in this HW. The one You need to use is build in FAN Setup in Menu->Setup->Settings->FAN Control

The HW does not have any kind of temparature sensors it is fake. could You tell me how does it work ?

You can get a stream directly from HDMI-IN by typing this in VLC on Your PC: http://192.168.1.5:8001/8192:0:1:0:0:0:0:0:0:0:?bitrate=300000?width=720?height=480?aspectratio=2?interlaced=1 192.168.1.5 - this is an IP of Your STB. If you want to access it through the STB, press YELLOW BUTTON and from Extensions list please chooce HDMI-IN in Full or PiP Screen. btw: Do You have DVB-S2 Turbo PSK standard in USA ?

I guess You have tottaly broken CFE. You need to use BBS Tool to flash it. sorry about bad news...

Please try: ifconfig -auto eth0 ping google.com printenv and show us result.

What You need to do is: Run TFTP program on Your Windows. Add Dir with CFE.bin. It will be listed in the APP. Ip is listed to. 1. Plug in RS232 2. Power ON 3. After pwoer on You have 2-3 seconds to press constantly CTRL + A + C. 4. After that You will see: CFE> Then You can type cmd I wrote above.

Make some screenshots and please explain us more.

Already reported. CrossEPG source was curropted while We build 6.6.1. OnLine update will follow by today.

http://sourceforge.net/projects/tftputil/ Just run on Your Windows PC. You need to have Your box in same network as windows PC. ifconfig -auto eth0 flash -noheader 192.168.1.122:cfe.bin flash0.cfe reboot done

Please setup TFTP server and try load cfe.bin from it. CTRL+ A + C durring boot. You will get into CFe > prompt. flash -noheader 192.168.1.122:cfe.bin flash0.cfe reboot Where 192.168.1.122 is Your TFTP server. It will work without BBS TOOL. P.s BBS Tool pinout are near CPU - 4 pins.

Please make us a photo of Your mainboard, I will try help which pins needs to be use.

Good luck I have tested on Sezam Marvel and Ultra bootloaders from our site. We do not have any issue with flashing and booting:) Happy New Year !

We are not able to provide You a BCM Tool for 7424. You need to find it in the internet or get it same way as you get it fro VU+ or Gigablue. If You have expirience it should not be an issue to flash new CFE

You need to run FLASH EXPOLER for BCM7424. You need to flash CFE.bin in offset 0x000000

Looks like you destroy box because You had to reboot Your box during CFE instlallation, You need to send it for service repair. Only they have a Jtag for BCM boxes.

It not a bootloader problem. Please paste us log when You try to flash bootloader 3.46 and image from USB.

You should flash this loader, and after that flash 3.46. On OLED You should see bootloader version after STB power on. Please be noted, that some people report us that they have problem with HDMI when they connect STB through AV Switch. Try to connect STB directly to TV by HDMI. Good luck. bootloader-sezam-marvel-v3.291-11.02.2014.zip

Could You give us more informations about it ?

We had some server issues.... please flash image by USB. Sorry for Problem.

MIRACLEBOX ULTRA vs DUO2 http://tinypic.com/player.php?v=vfh9wx&s=8

It has got BCM 7425 on board with 2GB FLASH 1GB RAM 1GBIT LAN BLUETOOTH WIFI 2xCI 2xSCI 3 TUNERS OLED

You are right. I am going to check it

EGAMI File Manager is on the same place as used to be: GREEN button -> Yellow button EGAMI Enigma2Config -> GREEN -> GREEN -> EGAMI Iinformations EGAMI Extras Panel it is since 6.0 called EGAMI PANEL - > Main Menu or 2xGREEN EGAMI Permanental Clock -> It is build in You can setup in EGAMI PANEL->Setup -InfoBar Settings -> Clock Swap Manager has been removed since 6.0

We are waiting for driver fix.